home *** CD-ROM | disk | FTP | other *** search
/ PC Plus SuperCD (UK) 1995 March / PC Plus Super CD (Issue 101) (March 1995).iso / doscim / cim01.lib / README.EXE / WINREAD.ME < prev   
Encoding:
Text File  |  1992-10-22  |  9.4 KB  |  305 lines

  1. If you are using Microsoft Windows and would like to set up a 
  2. "program group" that will hold the various icons for the DOS versions 
  3. of the CompuServe Information Manager and CompuServe Signup programs, 
  4. follow these instructions:
  5.  
  6. 1. Make sure that the CompuServe software has already been installed onto
  7.    the hard disk.
  8.  
  9.    NOTE: The install procedure uses the directory "C:\CSERVE\DOSCIM" as 
  10.          the default directory.  The Windows files that we have provided 
  11.          use the same default directory name.  If you chose not to use
  12.          this directory during the installation process, you will need
  13.          to modify the various Windows files that we have provided.  
  14.          See "MODIFYING WINDOWS FILES" below for details.
  15.  
  16.  
  17. 2. Get into Windows (usually by entering WIN at the DOS prompt).
  18.  
  19.  
  20. 3. Select "New" from the "File" pull-down menu.
  21.  
  22.  
  23. 4. Select the radio button for "Program Group".
  24.  
  25.  
  26. 5. Place the cursor in the "Group File" field (use the TAB key to move
  27.    to this field or click on the field with the mouse).
  28.  
  29.  
  30. 6. Enter "C:\CSERVE\DOSCIM\DOSCIM.GRP" (without the quotes) into the 
  31.    "Group File" field.
  32.  
  33.  
  34. 7. Hit the Enter key or click on the OK button in the dialog window with
  35.    the mouse.
  36.  
  37.  
  38. ------------------------------------------------------------------------
  39. A "CompuServe" group should now appear in the Program Manager window.
  40.  
  41. Unless you changed the default directory during the installation process,
  42. you are finished creating the CompuServe group.  
  43.  
  44. If you modified the default directory, read on.
  45. ------------------------------------------------------------------------
  46.  
  47.  
  48. MODIFYING WINDOWS FILES
  49.  
  50. If you modified the default directory, you will need to follow these
  51. instructions:
  52.  
  53. 1. Get into Windows (usually by entering WIN at the DOS prompt).
  54.  
  55.  
  56. 2. Select "New" from the "File" pull-down menu.
  57.  
  58.  
  59. 3. Select the radio button for "Program Group".
  60.  
  61.  
  62. 4. Place the cursor in the "Group File" field (use the TAB key to move
  63.    to this field or click on the field with the mouse).
  64.  
  65.  
  66. 5. Enter "C:\YOUR_DIRECTORY\DOSCIM.GRP" (without the quotes) into the 
  67.    "Group File" field.  Replace "YOUR_DIRECTORY" with the directory
  68.    you used during the installation procedure.
  69.    
  70.    NOTE: If you used a different drive than "C:", you will need to change
  71.          that also.
  72.  
  73.  
  74. 6. Hit the Enter key or click on the OK button in the dialog window with
  75.    the mouse.
  76.  
  77. ------------------------------------------------------------------------
  78. A "CompuServe" group should now appear in the Program Manager window.
  79. ------------------------------------------------------------------------
  80.  
  81. 7. If the "CompuServe" group is not already opened, open it (by double 
  82.    clicking on the group with the mouse or by using the keyboard 
  83.    commands to open the group).
  84.    
  85.  
  86. ------------------------------------------------------------------------
  87. If you did not install the CompuServe Signup files during the installation
  88. process, skip to step 19.
  89. ------------------------------------------------------------------------
  90.  
  91. 8. Select the icon that says "CompuServe Signup".  This is done by single 
  92.    clicking on the icon with the mouse (or by using the keyboard commands 
  93.    to select the icon).
  94.  
  95.  
  96. 9. Select the choice for "Properties" from the "File" pull-down menu.
  97.  
  98.  
  99. 10. Change the directory in the "Command Line" field to the 
  100.     directory you used during the installation procedure 
  101.     
  102.     Example: 
  103.     
  104.     C:\YOUR_DIRECTORY\SIGNUP.PIF
  105.  
  106.     Replace "YOUR_DIRECTORY" with the directory you used during the 
  107.     installation procedure.  If you used a different drive than "C:", 
  108.     you will need to change that also.  SIGNUP.PIF is the filename that
  109.     we use to start the CompuServe Signup program.
  110.  
  111.  
  112. 11. Change the "Working Directory" to the one you used during the 
  113.     installation procedure.
  114.  
  115.     Example:
  116.  
  117.     C:\YOUR_DIRECTORY
  118.  
  119.     Replace "YOUR_DIRECTORY" with the directory you used during the 
  120.     installation procedure.  If you used a different drive than "C:", 
  121.     you will need to change that also.  
  122.  
  123.  
  124.  
  125. 12. Choose the option for "Change Icon" in the "Program Item Properties"
  126.     dialog window.
  127.  
  128.  
  129. 13. If you see a dialog box that says "There are not icons for the specified
  130.     file.", dismiss the dialog window (by selecting OK in the dialog).
  131.  
  132.  
  133. 14. Click on the "Browse" button in the "Change Icon" dialog.
  134.  
  135.  
  136. 15. Locate and access the directory you used during the installation 
  137.     procedure.
  138.  
  139.  
  140. 16. Select the file "SIGNUP.ICO" and click on the OK button of the 
  141.     "Browse" dialog (or just double click on the file).
  142.  
  143. ------------------------------------------------------------------------
  144. You should now see the "CompuServe Signup" icon in the "Change Icon"
  145. dialog.
  146. ------------------------------------------------------------------------
  147.     
  148.  
  149. 17. Click the OK button in the "Change Icon" dialog.
  150.  
  151.  
  152. 18. Click the OK button in the "Program Item Properties" dialog.
  153.  
  154.  
  155. 19. Select the icon that says "CompuServe Information Manager".  
  156.     This is done by single clicking on the icon with the mouse (or by 
  157.     using the keyboard commands to select the icon).
  158.  
  159.  
  160. 20. Select the choice for "Properties" from the "File" pull-down menu.
  161.  
  162.  
  163. 21. Change the directory in the "Command Line" field to the 
  164.     directory you used during the installation procedure 
  165.     
  166.     Example: 
  167.     
  168.     C:\YOUR_DIRECTORY\CIM.PIF
  169.  
  170.     Replace "YOUR_DIRECTORY" with the directory you used during the 
  171.     installation procedure.  If you used a different drive than "C:", 
  172.     you will need to change that also.  CIM.PIF is the filename that
  173.     we use to start the CompuServe Information Manager program.
  174.  
  175.  
  176. 22. Change the "Working Directory" to the one you used during the 
  177.     installation procedure.
  178.  
  179.     Example:
  180.  
  181.     C:\YOUR_DIRECTORY
  182.  
  183.     Replace "YOUR_DIRECTORY" with the directory you used during the 
  184.     installation procedure.  If you used a different drive than "C:", 
  185.     you will need to change that also.  
  186.  
  187.  
  188.  
  189. 23. Choose the option for "Change Icon" in the "Program Item Properties"
  190.     dialog window.
  191.  
  192.  
  193. 24. If you see a dialog box that says "There are not icons for the specified
  194.     file.", dismiss the dialog window (by selecting OK in the dialog).
  195.  
  196.  
  197. 25. Click on the "Browse" button in the "Change Icon" dialog.
  198.  
  199.  
  200. 26. Locate and access the directory you used during the installation 
  201.     procedure.
  202.  
  203.  
  204. 27. Select the file "CIM.ICO" and click on the OK button in the 
  205.     "Browse" dialog (or just double click on the file).
  206.  
  207. ------------------------------------------------------------------------
  208. You should now see the "CompuServe Information Manager" icon in the 
  209. "Change Icon" dialog.
  210. ------------------------------------------------------------------------
  211.     
  212.  
  213. 28. Click the OK button in the "Change Icon" dialog.
  214.  
  215.  
  216. 29. Click the OK button in the "Program Item Properties" dialog.
  217.  
  218.  
  219. 30. Find and Run the Windows "PIF Editor".  This file is usually found
  220.     in the Windows "Accessories" group.
  221.  
  222.  
  223. ------------------------------------------------------------------------
  224. If you did not install the CompuServe Signup files during the installation
  225. process, skip to step 36.
  226. ------------------------------------------------------------------------
  227.  
  228. 31. Choose "Open" from the PIF Editor's "File" pull-down menu.
  229.  
  230.  
  231. 32. Find the directory you used during the installation and select the
  232.     file "SIGNUP.PIF".
  233.  
  234.  
  235. 33. Change the directory that is used in the "Program Filename" field.
  236.  
  237.     Example:
  238.  
  239.     C:\YOUR_DIRECTORY\SIGNUP.BAT
  240.  
  241.     Replace "YOUR_DIRECTORY" with the directory you used during the 
  242.     installation procedure.  If you used a different drive than "C:", 
  243.     you will need to change that also.  SIGNUP.BAT is the filename that
  244.     we use for the CompuServe Signup program.
  245.  
  246.  
  247. 34. Change the directory that is used in the "Start-up Directory" field.
  248.  
  249.     Example:
  250.  
  251.     C:\YOUR_DIRECTORY
  252.  
  253.     Replace "YOUR_DIRECTORY" with the directory you used during the 
  254.     installation procedure.  If you used a different drive than "C:", 
  255.     you will need to change that also.  
  256.  
  257.  
  258. 35. Choose "Save" from the PIF Editor's "File" pull-down menu.  This will
  259.     save your new settings.
  260.  
  261.  
  262. 36. Choose "Open" from the PIF Editor's "File" pull-down menu.
  263.  
  264.  
  265. 37. Find the directory you used during the installation and select the
  266.     file "CIM.PIF".
  267.  
  268.  
  269. 38. Change the directory that is used in the "Program Filename" field.
  270.  
  271.     Example:
  272.  
  273.     C:\YOUR_DIRECTORY\CIM.EXE
  274.  
  275.     Replace "YOUR_DIRECTORY" with the directory you used during the 
  276.     installation procedure.  If you used a different drive than "C:", 
  277.     you will need to change that also.  CIM.EXE is the filename that
  278.     we use for the CompuServe Information Manager program.
  279.  
  280.  
  281. 39. Change the directory that is used in the "Start-up Directory" field.
  282.  
  283.     Example:
  284.  
  285.     C:\YOUR_DIRECTORY
  286.  
  287.     Replace "YOUR_DIRECTORY" with the directory you used during the 
  288.     installation procedure.  If you used a different drive than "C:", 
  289.     you will need to change that also.  
  290.  
  291.  
  292. 40. Choose "Save" from the PIF Editor's "File" pull-down menu.  This will
  293.     save your new settings.
  294.  
  295.  
  296. 41. Choose "Exit" from the PIF Editor's "File" pull-down menu.  
  297.  
  298.  
  299. ------------------------------------------------------------------------
  300. You are now finished.
  301. ------------------------------------------------------------------------
  302.     
  303.  
  304.  
  305.